Citazione
GOLD LINE
PLAIN - TRUE RIB - SELECTED TERRY
BUSI®
TWIN LAYER
OVER 65-YEAR EXPERIENCE
Features

BUSI® TWIN LAYER is a high production single cylinder sock machine with latch needles in the dial that enable it producing technical sport socks with twin fabric. The machine is provided with a patented device that uses the dial needle to produce an internal layer and the cylinder needles to produce the external layer. The two fabrics that form the sock are knitted contemporarily and can be joined at whish, they merge in one only fabric at the welt at the heel and at the toe of the sock. This way the two fabrics cannot slide one onto the other. The above feature, added to the fact that of course the two fabrics can be knitted using different fibers and that the machine is provided with a device for the selected terry, gives the possibility to produce “technical socks” having textile features that were not possible until today. This fact, in addition to the possibility to have the double layer in only certain parts of the sock (only foot or only sole) will offer to the users of this machine the possibility to knit highly innovative products. In case of patterned socks, the yarn ends that normally are inside the sock will be “packed” in between the two layers thus ensuring a better comfort and a perfect wearing of the sock. The terry device enables the fully automatic switching from plain stitch to half terry and to full terry. The features of the machine are listed below.

Technical features
  • One feed
  • Stitch adjustment by step motors
  • Automatic stiffening on each step motor
  • Cylinder motion by Brushless motor
  • Possibility to store several articles in memory
  • Possibility to run a sequence of up to 4 different articles.
  • Possibility to modify the programs and/or the machine parameters during knitting
  • Programs are loaded through a USB stick or through the network
  • UPS power backup system
  • Photocell dropout control 
  • Automatic lubrication
  • All shafts work on roller bearings
Textile possibilities
1x1 true rib welt Pattern on mesh: 2 colours per course plus the ground + inner layer
Double welt Mesh pattern
Pattern on plain knit: 3 colours per course plus the ground + inner layer Selected terry with additional embroidery pattern 3 colors per course plus the ground + inner layer
Pattern on laid-in elastic: 3 colours per course plus the ground + inner layer 1x1, 3x1, 5x1 ecc.. true rib fabric
Technical Data
  • Diameters: 4", 4½”
  • Needles: 112 - 156
  • Available gauges: 36
  • Max. mechanical speed: 200 rpm
  • Speed in heels: 180 courses pm
  • Weight 420 kg
  • Technical dimensions cm 125 x 155 x 245
  • Technical dimensions (+ Rimaglio) cm 135 x 155 x 275
4 ½” 144 156
4" 112 132
Available options
  • RIMAGLIO device for the Classic Linking
  • Storage feeders
  • Kit for pattern in heel and toe
  • Yarn feeders mod. ULTRAFEEDER (BTSR)
  • BTSR yarn flow sensors
  • Anti-twist device
  • Suction fan
  • Vertical or horizontal yarn rack
  • Ethernet network connection (wired or wireless)
  • Production monitoring program BUSI® CONTROL TOWER
  • Pattern and article development program (ART-GEN)
Socks
Dettail

Busi® accepts no liability deriving from improper use of the machinery. The features described in this leaflet are for information only and might be changed without prior notice. The working parameters (e.g. maximum speed) may vary depending on yarn, knitting, lubrication etc.

Products that can be produced with BUSI® TWIN LAYER
BUSI® TWIN LAYER machine can make double layer socks by knitting two socks simultaneously, one inside the other. BUSI® TWIN LAYER machine can make double layer socks by knitting two socks simultaneously, one inside the other. Along with the double layer, the machine can also knit the cuff in true rib The double layer can be knit throughout the entire sock, except for the toe and heel The two layers can be made of different materials, such as wool on the inside and cotton on the outside Through the joints, it is possible to select the points which connect the two layers, creating the desired shape Through the joints, it is possible to select the points which connect the two layers, creating the desired shape The features of this machine make it suitable to produce leg warmers and knee guard, even with double layer fabric It is possible to create reinforcements or pockets in double layer in any desired shape, located anywhere on the leg and/or foot It is possible also to create internal pocket in the sock. In the photo you can see a pocket for the shin guard, applied to a football sock It is possible also to create internal pocket in the sock. In the photo you can see a pocket for the shin guard, applied to a football sock It is possible also to create internal pocket in the sock. In the photo you can see a pocket for the shin guard, applied to a football sock This model can be equipped with Rimaglio device which allows the classic linking to be achieved straight on the machine in a completely automatic way. With an optional device you can realize a pattern up to 4 colors, plus the ground. In this way, you can cover the entire heel and toe areas of the sock, on a terry or plain knit base. With an optional device you can realize a pattern up to 4 colors, plus the ground. In this way, you can cover the entire heel and toe areas of the sock, on a terry or plain knit base.